Sebelum halloween tiba, tidak ada salahnya untuk membuat kerajinan tangan bersama anak, selain membuat anak makin kreatif tentunya akan menambah quality time bersama anda This materials list contains affiliate links for products I recommend. •Plastic Trick or Treat Pumpkin •Rope •Tan Yarn •Light Colored Duct Tape •Masking Tape •Black Top Hat •Black Sunglasses •Scissors •Hot Glue and Glue Gun Cut off the existing black plastic handle on the pumpkin. Replace it with rope. Measure it, depending on the height of your child. Next, unwind the spool of yarn around a chair back several times. Pull it off and cut only one end. Lay out a piece of duct tape about 10” long. Lay the looped end of the yarn onto the duct tape. Tape it around the mid-section of the pumpkin. Repeat these steps and do the other side. Note: I happen to have blue duct tape, so that’s what I used. I would recommend choosing a light colored duct tape so that it doesn’t show through the yarn. Repeat the steps above again, but in shorter strips of duct tape. This time, tape them around the rim of the pail. Next, lift up the first layer and cover the face with masking tape. This will help hide the face behind the yarn. For mine, I also covered the blue duct tape with masking tape. Cut the top off of the top hat. Place it on top of the pumpkin allowing the rope to come through. It will fit snuggly on the pumpkin. Use duct tape to tape the hat to the pumpkin as shown. Source Article : https://www.diyinspired.com/cousin-diy-trick-treat-pail/ [ ... ]